Skip to content

Vericord

Code Coverage

Coverage

Vericord validates over 95% of ASME Section II Parts A and B material specifications for chemistry, mechanical properties, and heat treatment, across plate, sheet, strip, bar (including flat bar), rod, shapes, pipe and tube (seamless and welded), forgings (including flange, fitting and valve-part forgings), wrought fittings, and castings. Fastener specifications — bolts, studs, nuts, washers — aren’t covered today; if you need one, use the request form below. Every covered ASME specification includes its ASTM twin: if we validate SA-516, we validate A516. Coverage extends to widely used ASTM specifications outside the ASME book as well. Every requirement in our library is hand-built from the printed code and verified by materials SMEs before it goes live.

Coverage at a glance

96% of ASME Section II Parts A and B material specifications

95% of all Section II Parts A and B specifications

What we check

Chemical composition

  • Heat analysis, element by element, against the limits for the cited grade or UNS number
  • Product (check) analysis, with the general spec’s permitted variations applied
  • Table footnote limits
  • Formula and ratio checks, such as Ti/N minimums and Cu ≤ 1.00 − (Ni + Cr + Mo)
  • General-requirements rules (SA-6, SA-20, SA-29, SA-480, SA-484, SA-788, SA-960, SA-961) when the product spec points to them
  • Killed-steel requirement where the spec mandates it
  • Reported elements with no limit are flagged, not silently passed

Mechanical properties

  • Tensile strength and yield strength
  • Elongation in 2 in. and 8 in., longitudinal and transverse
  • Reduction of area
  • Hardness: Rockwell, Brinell and Vickers, single and average
  • Charpy V-notch impact, single and average
  • Grain size (ASTM number minimum)
  • Thickness, class, grade and condition adjustments applied throughout

Tests (required and passed)

  • Bend, reverse bend, flattening, reverse flattening, flaring, flange, wrap, hydrostatic and nondestructive electric test

Heat treatment

  • Heat-treatment requirements, per heat, against the spec’s rule for grade or UNS number, class, product form, thickness and finish
  • The heat-treatment process, temper and anneal condition, temperatures, times and related requirements

Not graded today: intergranular corrosion, magnetic particle, liquid penetrant, radiography, macroetch, drop-weight, lateral expansion, ferrite / PREN.

How it's checked

Footnotes applied

Table notes, product-analysis tolerances and general-requirements rules are applied before a value is graded.

ASTM sections adopted by ASME

Any ASTM section adopted by a covered ASME specification is validated as well.

Every line traceable

Each result shows the spec value, the MTR value, the difference and the clause it comes from.

Nothing silently skipped

In-scope requirements that aren’t machine-validated go to the Exception Report for manual verification.

Product forms

In scope

  • Plate, sheet and strip
  • Bar (including flat bar), rod and shapes
  • Pipe and tube, seamless and welded
  • Forgings, including flange, fitting and valve-part forgings
  • Wrought fittings
  • Castings

Not covered in this release

  • Bolting and fasteners: bolts, studs, nuts, washers
  • Clad plate
  • Wire, springs, chain and rivets

Carbon, low-alloy, Cr-Mo and stainless steels, nickel, copper, aluminum, titanium and zirconium alloys.

Don’t see your code book or section?

Let us know. Customer requests directly shape what we build next. Send us the specification you need and how you use it, and we’ll put it in the queue.

Request a Specification